OpenBSD 3.1-stable (TP240) #6: Fri Jul 12 16:46:44 EDT 2002 rees@repository:/afs/citi.umich.edu/machdep/i386_obsd31/usr/src/sys/arch/i386/compile/TP240 cpu0: Intel Celeron (Mendocino) ("GenuineIntel" 686-class, 0KB L2 cache) 299 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 66629632 (65068K) avail mem = 59047936 (57664K) using 838 buffers containing 3432448 bytes (3352K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(1d) BIOS, date 08/20/99, BIOS32 rev. 0 @ 0xfd7c0 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 99% apm0: AC on, battery charge high WARNING: preposterous time in file system WARNING: file system time much less than clock time pcibios0 at bios0: rev. 2.1 @ 0xfd7c0/0x840 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf60/128 (6 entries) pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus WARNING: can't reserve area for I/O APIC. bios0: ROM list: 0xc0000/0xa000 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03 pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured vga0 at pci0 dev 9 function 0 "Neomagic Magicgraph NM2160" rev 0x01 wsdisplay0 at vga0: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 PCI-CardBus" rev 0x00: irq 11 eso0 at pci0 dev 11 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946 rev E, irq 5 eso0: mapping Audio 1 DMA using VC I/O space at 0xfc70 audio0 at eso0 opl0 at eso0: model OPL3 midi0 at opl0: "AT&T/Lucent Win Modem V.90" rev 0x01 at pci0 dev 12 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 midi1 at pcppi0: sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 biomask 4840 netmask 4840 ttymask 58c2 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 pcmcia0: CIS version PC Card Standard 5.0 pcmcia0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01, pcmcia0: Manufacturer code 0x156, product 0x2 pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1 pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel wi0 at pcmcia0 function 0 "Lucent Technologies, WaveLAN/IEEE, Version 01.01" wi0: Firmware 7.52 variant 1, address 00:60:1d:f1:73:d3 ums0 at uhub0 port 1 configuration 1 interface 0 ums0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0